What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 28.06.2025 04:30
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Large Bluetooth speaker with style and power - Marshall Tufton in a practical test - Notebookcheck
the problem then depends on "how fast does the fuse operate?".
What does a fuse do?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
nine
What is lightning?
A circuit breaker is similar, but is resettable.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Baltimore restaurant wins James Beard Award - WBAL-TV
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
a photo is worth a thousand words.
There are three different concepts here that are getting confused.
Is there any way to simulate the effect of a sauna or steam room on the body from one's own home?
but this device (an Inductor) … impedes the rapid changes in the current.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
First Sentence:
ChatGPT's AI coder Codex now lets you choose the best solution - BleepingComputer
so, what happens?
It seems Mohan does not understand the difference between a comment and an Answer.
Here is a simplified AC power diagram.
Europe stock markets fall after Trump doubles steel tariffs - CNBC
For this case there are devices called Metal oxide varistors (MOV).
2024–10–10[John johnson John Johnson ]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Barnstars:
One
One is “what exactly is in a ‘surge protector’ ? ”
The third is lightning and “how it gets conducted into a home.”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Now when you have a certain ac resistance, then a current flows in a loop.
2024–10–16 [ OO OLAOYE OYEBODE ]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Belmont Stakes 2025: Win, place, show, exacta, trifecta and superfecta picks - SportsLine
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Are there girls here who like group sex?
In schematic diagrams this is the symbol for a fuse:
He then describes the function of a fuse.
This device then solves the entire problem.
Wright State stuns No. 1 Vanderbilt with historic upset in baseball regionals - Yahoo Sports
But… the neutral is now “floating” because of the 1 ohm resistance.
Because the load is inductive, the current lags the voltage.(by a bit).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Do you like wearing short skirts?
I post the exact comment here.
At least they know the answer if they wanted it.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Utah health officials monitoring potential measles exposure in southwestern Utah - KSL.com
This one hit behind the barn.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–14 [Omar Gharbi Omar Gharbi ]
An AC voltage/ current source, and an ac inductive load.
what exactly is a ‘surge’ protector?
This is 'the assistant's answer'
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Upvotes:
But it can get overloaded, and no longer works.
This is where the MOV conducts again, and dissipated the energy.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
A fuse is a non-resetable over current circuit protector.
(Dc diagram shown, AC is similar).
eight
At one ohm, the resistor has a maximum of 1 watt power.
He then asserts :
These devices are installed between the “hot” and “neutral” and protective ground.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
It also is a device that limits the change in current flow.
He then describes Rainy Season and Lightning.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
These are simplified answers to the original question, and does not change anything I wrote above.
There are two important concepts here.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The bolt then partially travels down the line to your home.
Edit 2024–10.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
[old diagram got deleted by accident]
So, the voltage could go up to 500 volts, and the fuse will not open up.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
[image of Common-mode choke]
The other is “what does a “fuse” do?”
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
The MOV will conduct when the voltage exceeds 50% of line voltage.
but I think this circuit , shows a few more pieces.